1. <em id="88zzy"><ruby id="88zzy"><input id="88zzy"></input></ruby></em>
    2. <em id="88zzy"></em>

    3. <rp id="88zzy"></rp>

      <rp id="88zzy"></rp>
      Flux Series Products

      6-1-1 617E Liquid Flux:

      Products Characteristics:

      1. This product is transparent, and have a low content of rosin

      2. Halogen-free, no corrosivity

      3. Higher surface insulation resistance

      4. To foam, and spray

      5. No effect on the electrical properties of the socket surface

      6. Solder joint is full and bright

      7. The nozzle is never jammed

      Products Instructions:

      Composition:Alcohol Solvent Mixture,Interface Activator,Activation,Antioxidants,Anti-corrosive

      Directions:The products are non-clean type flux, the fulx also meets the requirements of the U.S. military standard, MIL-F-14256D. This product is suitable for the wave soldering and hand soldering with lead-free solders.

      617E Specification

      NO. Specification Item Specs
      01 Flux Model 617E
      02 Flux Categopy RMA
      03 Chemical Classification Rosin
      04 Joints Color Colorless
      05 Solid Content 8.0±0.5wt/%
      06 Physical State Liquid
      07 Color Of Liquid Yellow
      08 Specific Gravity(20℃) 0.813±0.010
      09 Boiling Point(℃) 83.0±2.0℃
      10 Tly of Solvent(ppm) 400 ppm
      11 Acid Value 30.0±5.0mg(KOH)/g
      12 Spread ratio(%) ≥85%
      13 Halide Content 0.045±0.010%
      14 Insulation Resistance ≥4.0×1011Ω
      15 Corrosion Test Pass
      16 Applications Foma Spray
      17 Pre-Coating Prohibited
      18 Thinner Used ZY-900

      617E Compositions

      Ingredients Contents Threshold Limit Value(TLV) Remark
      Moldfied resin w/w 5.8% -  
      Flux Vehicle 0.5% -  
      Activator 1.3% -  
      Acid Absorbent 0.2% -  
      Anti-Oxide Agent 0.1% -  
      Corrosion Inhibitor 0.1% -  
      Mixed Alcohol 92.0% 400ppm  

      617E Physical and Chemical Characteristics

      Appearance Liquid Odourr Aromatic
      Specific Gravity (20℃) 0.813±0.010 Melting Point(℃) --89.5
      Boiling Point(℃) 83.0±2.0 Vapor Densitv (Air=1) 2.0
      Vapor Pressure(mmhg) 32 Evaporation Rate (Ether=1) 16--20

      617E Reactivity Data

      Stability stable
      Conditions Avoid Keep in cool dry place avoid direct sunlight and extensive heat
      Incompatbility(Materials To Avoid) Acid Or Alkaline Solutions, Water, Grease, Inorganic Materials
      Hazardous Decomposition Products Oxidant
      Hazardous Polymerization Will Not Occur

      >> 1 2 >>

      津ICP備05011517號-1 Copyright © 2010 Cooper ZhongyaSolder,Inc All Rights